The first new Citaro hybrid buses left the factory and will gradually go into service with Stuttgarter Strassenbahnen AG (SSB). They will be used to carry passengers on inner-city routes in Stuttgart, Mercedes-Benz said.
The hybrid buses are claimed to save fuel of up to 8.5 percent. In late 2018, the Citaro hybrids will switch to the new X1 express bus service introduced by SSB especially for low-emission buses with innovative powertrain technology.
“The objective with the Citaro hybrid is to make the diesel engine even more economical while optimising the degree of electrification for maximum overall economic efficiency,” says Rüdiger Kappel, Sales Manager Mercedes-Benz Buses Germany, explaining the concept behind the vehicles.
The buses are mild hybrids
A disc-shaped electric motor is positioned between the engine and the automatic transmission. On overrun or when the bus is braking, the energy recovery phase, the motor acts as a generator to produce electric power, which is briefly stored by the Citaro hybrid in capacitors, so-called mild hybrid storage (MHS). When the bus accelerates again, the electric motor uses the stored energy to assist the diesel or gas engine with extra torque. Mercedes-Benz calls this the support phase. The electric motor has a maximum output of 14 kW (about 19 hp) with a torque of 220 Nm.
On acceleration and as the vehicle pulls away, the combustion engine needs to deliver significantly less power thanks to the electric support. This saves fuel, the company said. The electric motor also provides assistance at idle.
The components used in these buses are present in the other family vehicles too. For example, the electric motor serves as a starter-alternator in the current S-Class, while the additionally required cooler for the motor and inverter is used by Mercedes-Benz Trucks and the water pump can be found in many Mercedes-Benz cars.
Steering on demand
Another feature that benefits overall economic efficiency is “intelligent eco steering”. This electrohydraulic steering cuts in only when required, i.e. when the driver turns the steering wheel. In a conventional hydraulic steering system, the assistance is permanently in operation. Here, the eco steering saves fuel.
Easy Maintenance
Also, the electric support lightens the load on the combustion engine while also taking work off the brakes during deceleration, which prolongs their service life, MB said.
The Citaro hybrid makes life easy for after-sales service and workshops. Besides the series-produced parts used for the electric motor, energy storage and cooling, the absence of high-voltage technology is another key factor. The 48 V system is classed as low-voltage technology and can be handled without risk of injury. The ancillary components remain unchanged and are driven conventionally. The maintenance intervals for the Citaro hybrid are also identical, at 60,000 km or once a year; the same applies to all maintenance points on the conventional powertrain.
Recommended for you
Leave a Reply
Note: Comments that are unrelated to the post above get automatically filtered into the trash bin.
